If you’ve just picked up the iLoud Micro Monitor and want to stream audio to it over Bluetooth, the process is straightforward once you know where to look in the menu. This quick guide walks you through pairing step-by-step and gives you an idea of what to expect in terms of volume and performance. You can grab it here on Amazon if you’re interested.
Overview / First Impressions
The iLoud Micro Monitor is a compact, powered monitor system that also supports Bluetooth audio. That makes it handy for:
- Practicing guitar along with backing tracks
- Casual listening without extra cables
- Using it as a small reference system for demos or mobile setups
In this walkthrough, we’re pairing the monitor with a device via Bluetooth and briefly checking how it sounds and behaves at higher volumes.
Step-by-Step: Pairing Bluetooth with the iLoud Micro Monitor
Here’s the basic pairing process:
- Open your device’s settings
On your playback device (tablet, phone, or similar), tap the settings icon. If you’re on a device with a navigation bar, hit the arrow in the bottom-right to get back to the main settings screen if needed. - Go to system settings
Navigate to System Settings (or equivalent on your device). - Find Bluetooth settings
Scroll down to Bluetooth Settings and make sure Bluetooth is turned on. - Start a Bluetooth scan
Select Bluetooth Scan (or “Scan for devices,” depending on your OS). Your device will begin scanning for nearby Bluetooth devices. - Put the iLoud Micro Monitor in pairing mode
Press the Bluetooth button on the iLoud Micro Monitor to enable pairing mode. The monitor should now be discoverable. - Select the iLoud Micro Monitor
On your device, under Available Devices, look for something like “iLoud Micro Monitor” and tap it to connect. - Wait for confirmation
After a moment, the device should show as Connected or Paired. Once paired, all audio from your device will route to the iLoud Micro Monitor.
How It Sounds / Real-World Use
Once paired, you can play any audio from your device—backing tracks, mixes, or your own music. In this case, a custom track was used to avoid copyright issues, but any audio source works the same way.
A few quick impressions:
- Volume: When cranked up, the iLoud Micro Monitor gets surprisingly loud for its size. Even well below maximum volume (around 40% in this example), it was already quite powerful.
- Performance: The Bluetooth connection worked smoothly, with no obvious dropouts or pairing issues once connected.
For guitarists, this makes it handy for:
- Jamming along to tracks from your phone or tablet
- Practicing quietly at home with a compact, full-range system
- Using modelers or amp sims that can output to Bluetooth via a host device (though for serious work, wired is still preferable due to latency)
Limitations / Things to Know
A few practical notes:
- Bluetooth latency: Like any Bluetooth system, there may be a small delay, which can be noticeable if you’re trying to play guitar in real time through a Bluetooth signal chain. For critical playing or recording, use a wired connection.
- Menu navigation: The exact path to Bluetooth settings depends on your source device’s OS (Android, iOS, etc.). The steps above are a general guide, but names like “System Settings” and “Bluetooth Scan” might differ slightly.
- Single device at a time: Typically, the monitor will only maintain an active connection with one Bluetooth device at a time. If you’re switching devices, you may need to disconnect or “forget” the monitor on the previous device.
Final Thoughts
The iLoud Micro Monitor’s Bluetooth feature is easy to set up and works well in practice. For guitarists, producers, or casual listeners who want a compact monitoring solution with wireless convenience, it’s a genuinely useful addition—not just a gimmick.
Use Bluetooth for:
- Backing tracks
- Reference listening
- Quick, cable-free sessions
Then switch to a wired connection when you need zero-latency, critical monitoring for guitar or recording.